How to Add Color to Epoxy Resin?

 How To Add Color To Epoxy Resin

When making a piece using Epoxy Resin, coloring becomes essential. It adds value to the piece making it presentable, whether for a DIY purpose or making a substantial commercial sale. There are different types of colorants, and it’s essential to note what piece one is using to get that glossy and attractive look.

Its also important to note that time is of ultimate purpose when using Epoxy resin, and so when mixing, always ensure that all products that are to be used are ready to move with the expected timelines. Some artists might decide to use the resin color, which is colorless and still produce a crystal clear shine. However, knowing how to go about when making the coloring is vital if you want to create an aesthetically pleasing resin.   Among the items to add color include furniture, tabletops, chairs, jewelry, household items, and they all look pleasing if done in the right way.

This article aims to help one find the right color for the epoxy being used and how to go about when adding it to make it look gorgeous.

It’s also important to know the media to use to color resin since not all color media available around is suitable for color epoxy.  For instance, if the chosen color has some oil or water components, then the mixing ratio would need to change. Otherwise, the expectation would not turn out well. Some dull spots may be experienced, and curing may not take place effectively.

Below is The Procedure That One Can Use to Add Color to Resin

1. Purchasing The Right Paint

Also read:  Can You Set Hot Pans on Quartz?

Whenever one thinks of coloring epoxy, it is necessary to purchase the right color texture specially designed for color resin. These can be bought from the crafting stores or buy resin tints online as desired. Tints, in this case, refer to a type of artificial dye that is meant to change the color of an object.  Examples of tints include So-Strong and Resin Tint.

2. Mixing The Resin

Before adding any colorant, mix the resin and the hardener well and ensure no bubbles. This should be done by following the instructions to avoid disappointment in the course of preparation. Since this is a toxic procedure and can be harmful to one’s health, protect yourself with rubber gloves, facemasks, and a respirator if there is limited aeration.

3. Testing Phase

Before adding the color to the entire mix, it’s essential to mix some small amount of colorant to ensure that it works well.  For instance, it’s recommended to use a small measuring cup, the one used for dispensing cough syrups, and mix with the resin to see if it can produce the desired blend of color that one is looking for.

4. Add Colorant

If convinced that the mixture is okay, then the next phase is to add the colorant with the correct ratio, ranging between 2-6% of the total mix.  Using a digital scale would be more precise when measuring the colorant to mix. Stir thoroughly until you get the right color you intend to use.

In the event that the amount of color is not sufficient, you can always add more, as long as this does not exceed 6% of the entire mixture. Anything above this will interfere with the chemical reaction and end up not getting optimal results. Use a tooth pick to stir  or a small stick  and gently  stir as you proceed.

Also read:  Can You Sand Epoxy Primer?

When adding and mixing the color, ensure that there is no occurrence of bubbles. The final mixture should be smooth, free from bubbles so that the surface being applied the new colored resin will be glossy, smooth, and attractive.

5. Color Adjustment

There are times that one may not achieve the expected results. For instance, if you get more color than expected, the best thing is to start the process again but in this case, use less color than the previously used. In case the color is not sufficient, then add to the desired levels.

It might turn out that the color one is using may not produce the exact results as intended. Always consider trying another colorant that you have available.

6. Add pigments To The Mixture

For the pigments mixture lovers, you can add some tiny pigments to the new mixture to produce a grainy look; however, if looking for a completely smooth mixture, there would be no harm using the mixture as it was before. All that matters is what works best for your project.

7. Application

Now that the mixture is complete, it’s time for application. Apply the mixture to the surface as required and give it time o cure. Repeat the process any time you wish to add color to the resin, and if correctly done, the end results will be excellent. These are the basic steps that are safely used to the color resin.

How to Tint Resin?

As said above, a tint is an artificial dye used to change an object’s color. To get excellent results when tinting resin, pour out the first layer and ensure that the mixture is smooth. Should it turn out that there are any bubbles, and then torch them out. Allow 3-5 hours for curing the ArtResin epoxy, and your tint will be done.

Also read:  Epoxy Flooring Thickness in Mm?

Frequently Asked Questions

Q. How do you tint epoxy?

A.  The best way to tint epoxy is by use of dry rare-earth powdered colors. Avoid using oil paint pigments or any other form of acrylics, solvents, or stains.

Q. What can one use to Color Epoxy Resin?

A. There are various colorants that one can use, such as children’s watercolor paint, dyes and these are known to produce smooth finishes so long as there is no presence of bubbles in them.  Others include nail polish and ink alcohols which are well known too to color epoxy resin.

Q. Is Resin Poisonous?

A. Resin emits poisonous fumes or gases, but there is a preventive measure to this; always wear a face must avoid inhaling the gas resulting from the plastic liquids. In this case, epoxy is the liquid plastic.

Leave a Comment