Can You Use Uv Resin in Silicone Molds?

If you’re thinking about using UV resin in silicone molds, there are a few things you should know. First of all, it’s important to use a mold that is specifically designed for use with UV resin. These molds will have a smooth surface that won’t cause the resin to stick or tear.

  • Prepare your mold by spraying it with a mold release agent
  • This will help the UV resin not to stick to your mold
  • Mix your UV resin according to the manufacturer’s instructions
  • Pour the mixed UV resin into your mold, and use a toothpick or other tool to degas the resin (remove any bubbles)
  • Cure the UV resin according to the manufacturer’s instructions
  • This step is important, as uncured UV resin can be harmful to skin and eyes
  • Once cured, remove the UV resin from your mold and enjoy!

Does Uv Resin Stick to Silicone?

Yes, UV resin does stick to silicone. In fact, it sticks quite well! This is because both materials are polymer based, so they have a strong affinity for each other.

The key is to make sure that the surfaces you’re trying to adhere to are clean and free of any oils or dirt, which can act as a barrier and prevent the two materials from bonding properly. If you’re unsure whether your surfaces are clean enough, you can always give them a quick wipe with some rubbing alcohol before proceeding.

How Do You Use Uv Resin in Molds?

If you want to use UV resin in molds, there are a few things you need to know. First, you need to find a mold that is made specifically for resin. These molds will have a smooth surface that will allow the resin to cure properly.

You also need to make sure that the mold is big enough to fit the piece you want to create.

Also read:  Can You Drill into Epoxy Resin?
Once you have your mold, you need to prepare it for the resin. Start by cleaning it with alcohol or soap and water.

This will help remove any oils or residues that could prevent the resin from curing properly. Next, pour some resin into the mold and then place it in a UV curing chamber or under a UV light source. Cure the resin according to the manufacturer’s instructions.

Once it is cured, you can remove your piece from the mold and enjoy it!

What Kind of Resin Do You Use for Silicone Molds?

There are two main types of resin that can be used for silicone molds: polyurethane and epoxy. Polyurethane resins are typically cheaper and easier to find than epoxy resins, but they are not as strong or durable. Epoxy resins, on the other hand, are more expensive but offer a stronger bond and greater resistance to heat and chemicals.

When choosing a resin for your silicone mold, it is important to consider what the mold will be used for. If you need a strong and durable mold, then an epoxy resin is likely the better option. However, if you are looking for a less expensive option that is still suitable for most purposes, then a polyurethane resin would be a good choice.

Can Uv Resin Be Used for Casting?

Yes, UV resin can be used for casting! It is a versatile material that can be used for many different applications. UV resin is perfect for creating small objects or detailed pieces that need to be smooth and have a high level of detail.

It can also be used to create larger objects by pouring them into molds. When cured, UV resin is very strong and durable, making it perfect for creating functional parts or pieces that will be handled frequently.

Can You Use Uv Resin in Silicone Molds


Can You Use Uv Resin And Epoxy Resin Together?

It’s a common question we get asked here at Resin Obsession: can you use UV resin and epoxy resin together? The answer is yes! You can use these two resins together to create unique, one-of-a-kind pieces.

When using UV resin and epoxy resin together, there are a few things to keep in mind. First, because the epoxy resin is thicker than UV resin, it will take longer for the UV light to cure it. This means that you’ll need to be patient and give your piece plenty of time to cure completely before handling it or adding any embellishments.

Second, because epoxy resin takes longer to cure, it will also shrink more than UV resin as it cures. This means that your piece may end up slightly smaller than you intended once it’s fully cured. Keep this in mind when planning your design.

Finally, because these two resins have different properties, they will behave differently when mixed together. For example, Epoxy Resin is not self-leveling like our UV Resin is. So if you mix the two together and pour it into a mold, the epoxy portion of the mixture will stay put while the thinner UV resin flows around it – resulting in some interesting patterns!

So there you have it – everything you need to know about using UV resin and epoxy resin together. Be sure to experiment and have fun with it – there are endless possibilities for what you can create!

Also read:  How to Make Epoxy Floors Shine?

How to Color Uv Resin?

Uv resin is a great way to add color to your projects!

Here are some tips on how to get the best results:

1. Choose your colors. You can use any type of paint or pigment for this, but we recommend using liquid food coloring for the brightest and most vibrant results.

2. Mix your colors together. This step is optional, but it can help you achieve a more uniform color if you’re using multiple colors.

3. Add the pigment to the resin. We recommend using a toothpick or other small tool to avoid getting color on your skin.

4. curing the resin with UV light. Place your project in direct sunlight or under a UV lamp for 2-3 minutes, or until the resin has hardened and turned clear again.

How to Use Uv Resin on Keychains?

If you love making your own jewelry, then you’ll definitely want to give UV resin a try! This type of resin is perfect for creating unique and one-of-a-kind pieces. And what’s even better is that it’s super easy to use – even for beginners!

In this blog post, we’ll show you how to use UV resin to create beautiful keychains.

To get started, you’ll need the following supplies:

-UV Resin

-Keychain Rings

-Molds (optional)

-Mixing Cups (optional)

-Stirring sticks (optional)

-Gloves (optional)

Here are the basic steps:

1. If using molds, prepare them by lightly spraying with mold release or rubbing with petroleum jelly.

2. Measure out the amount of UV resin needed for your project into a mixing cup. If using colorants, mix them in now.

3. Pour the mixed resin into your mold(s).

Also read:  Where Can I Buy Resin for Crafts?

4. Place the keychain rings into the wet resin, making sure they are completely covered.

5. Cure the resin using a UV lamp or sunlight until it is hard and clear.

6. Remove cured keychains from molds (if used).

7 . Admire your handiwork!


Yes, you can use UV resin in silicone molds! This is a great way to create custom charms, pendants, and other jewelry.

Here are some tips for using UV resin in silicone molds:

-Make sure your mold is clean and dry before adding the resin.

-Pour the resin into the mold slowly so that it does not overflow.

-Use a toothpick or other sharp object to pop any bubbles that appear in the resin.

-Cure the resin according to the manufacturer’s instructions. Usually, this involves exposing it to UV light for a few minutes.

Leave a Comment