Can You Epoxy Over Powder Coated Tumbler?

Powder coating is a process of applying dry powder to metal tumblers in order to give them a smooth, hard finish. This type of coating is typically applied to automotive parts and other objects that will be exposed to high levels of wear and tear. Many people wonder if they can epoxy over powder coated tumblers in order to add an extra layer of protection.

  • Sand the powder coating off of the tumbler with fine-grit sandpaper
  • This will help the epoxy to adhere better
  • Clean the tumbler with isopropyl alcohol to remove any residue from sanding
  • Mix your epoxy according to the instructions on the packaging
  • Apply a thin layer of epoxy to the tumbler with a foam brush or similar applicator
  • Allow the epoxy to cure for 24 hours before using the tumbler

Can I Epoxy Over Powder Coating?

It is possible to epoxy over powder coating, but there are a few things to keep in mind. First, the powder coating must be completely cured and hard. If it is not fully cured, the epoxy will not adhere properly.

Second, the surface must be clean and free of any oils or contaminants that could prevent the epoxy from bonding. Finally, roughening up the surface of the powder coating can help improve adhesion.

How Do You Prepare a Powder-Coated Tumbler for Epoxy?

If you want to add some extra protection to your powder-coated tumbler, you can apply a layer of epoxy. Epoxy is a strong adhesive that will create a water-resistant barrier, making it ideal for use on tumblers that will be exposed to moisture.

Here’s how to prepare your tumbler for epoxy:

1. Start by cleaning the surface of your tumbler with rubbing alcohol. This will remove any oils or dirt that could prevent the epoxy from bonding properly.

Also read:  Can You Spray Paint Resin?

2. Once the tumbler is clean, sand down the powder coating using fine-grit sandpaper. This will create a rougher surface for the epoxy to adhere to.

3. Apply a thin layer of epoxy resin to the tumbler, using a brush or roller. Make sure to evenly cover the entire surface.

4. Allow the epoxy to cure for 24 hours before using your tumbler again.

How Do You Get Vinyl to Stick to Powder Coated Tumbler?

If you want to add vinyl to a powder coated tumbler, there are a few things you need to do in order to make sure it sticks. First, you need to clean the surface of the tumbler with isopropyl alcohol. This will remove any oils or dirt that may be on the surface and prevent the vinyl from adhering properly.

Next, you need to roughen up the surface of the powder by coating it with sandpaper. This will create a more porous surface for the vinyl to adhere to. Finally, apply your vinyl decal using transfer tape.

Once everything is in place, press down firmly on the design to make sure it’s fully stuck before removing the transfer tape.

Can You Epoxy a Colored Tumbler?

Yes, you can epoxy a colored tumbler. Epoxy is a clear resin that is often used to coat surfaces and protect them from damage. It can also be used to add color to an object.

When adding color to an object with epoxy, you will need to use a pigment or dye. You can find these at most craft stores.

Can You Epoxy Over Powder Coated Tumbler


How to Resin a Hydro Flask?

If you’re like me, you probably have a Hydro Flask that you take with you everywhere. Whether it’s to the gym, on a hike, or to work, these water bottles are great for keeping your drinks cold (or hot!) But did you know that you can also resin them? Resining your Hydro Flask is a great way to add some personality and style to your water bottle.

And it’s not as difficult as you might think! In this blog post, I’m going to show you how to resin a Hydro Flask step-by-step. First, gather your supplies.

You’ll need:

Also read:  Can You Dry Flowers in the Microwave?

-A Hydro Flask

-Resin (I like ArtResin)

-Mixing cups and stir sticks

– gloves

– Tape

Next, prepare your workspace. Cover your work surface with wax paper or freezer paper to prevent sticking and make cleanup easier. Then tape off the opening of the Hydro Flask so that resin doesn’t get inside.

Now it’s time to mix the resin according to the manufacturer’s instructions. Once it’s mixed, pour it into the flask slowly, being careful not to overfill. You can use a popsicle stick or other object to help move the resin around and ensure an even coat.

Allow the resin to cure for at least 24 hours before removing the tape and using your new hydro flask!

How Many Coats of Epoxy on Tumbler?

If you’re looking to give your tumbler cups a little extra protection, you may be wondering how many coats of epoxy you need to apply. The answer may depend on a few factors, but in general, two or three coats should suffice. Applying multiple coats of epoxy can help to create a stronger and more durable finish.

It can also help to prevent any air bubbles from forming in the epoxy, which can cause imperfections in the final product. If you’re using thinners or other additives in your epoxy mixture, you may find that you need to apply more coats to achieve the same level of protection. In general, it’s always better to err on the side of caution and add an extra coat or two than it is to skimp on coverage.

Once you’ve applied the desired number of coats, be sure to allow ample time for the epoxy to cure completely before using your tumblers. Curing times will vary depending on the type of epoxy used, so consult your manufacturer’s instructions for specific guidance.

How Long Does an Epoxy Tumbler Need to Turn?

If you’re looking to make your own epoxy tumbler, you might be wondering how long it needs to turn. The answer depends on a few factors, but generally speaking, you should aim for at least 24 hours.

Also read:  Can You Hot Glue Styrofoam?
The first factor is the type of epoxy you’re using.

There are many different formulas on the market, and each one has its own curing time. Some epoxies cure faster than others, so be sure to check the label before starting your project. The second factor is the temperature of your workspace.

Epoxy cures best at room temperature, so if it’s too cold or too hot in your garage or basement, it will take longer for the tumbler to cure properly. Finally, the size of your tumbler plays a role in how long it needs to turn. A small tumbler can cure in as little as 12 hours, while a large tumbler might need 36 hours or more.

So there you have it! If you’re planning on making an epoxy tumbler, be sure to allow enough time for the epoxy to cure properly. And if you have any questions about which formula is right for your project, just ask a salesperson at your local hardware store – they’ll be happy to help!


If you’re looking to add a little extra flair to your powder coated tumbler, you may be wondering if you can epoxy over the top. The short answer is yes! Epoxy is a great way to add some extra color and design to your tumbler, and it’s also incredibly durable.

Here’s what you need to know about epoxying over powder coating.

Leave a Comment